Tilt Rotation Motor Drive Holder MP-01330TRMH
The Tilt Rotation Motor Drive Holder (TRMH) is a motorized specimen holder designed for the JCM-7000, NeoScope™. This holder provides tilt and rotation capability during image observation. Installing this holder allows for 4 axis motor control.
All controls are through the software interface. The TRMH provides 360° continuous rotation as well as the ability to tilt a specimen from -10° to +45°. Control the tilt angle from the stage graphic or numerically input a tilt angle.
![](https://jeolusa.s3.amazonaws.com/resources_eo/Tilt%20Rotation%20Motor%20Drive%20Holder%20MP-01330TRMH%20002.gif?AWSAccessKeyId=AKIAQJOI4KIAZPDULHNL&Expires=2145934800&Signature=h61d1eRoHZOU%2FGkoeUXfrE6En8Y%3D)
![](https://jeolusa.s3.amazonaws.com/resources_eo/Tilt%20Rotation%20Motor%20Drive%20Holder%20MP-01330TRMH%20003.jpg?AWSAccessKeyId=AKIAQJOI4KIAZPDULHNL&Expires=2145934800&Signature=0FKF7mWt6m77dk7HDiJLvy75BwY%3D)
This holder can be mounted in two orientations, which changes the tilt axis direction, allowing for maximum flexibility when working with specimens that have a lot of topographic relief. Therefore, the specimen orientation can be easily optimized for both imaging and EDS analysis.
![](https://jeolusa.s3.amazonaws.com/resources_eo/Tilt%20Rotation%20Motor%20Drive%20Holder%20MP-01330TRMH%20004.gif?AWSAccessKeyId=AKIAQJOI4KIAZPDULHNL&Expires=2145934800&Signature=jMnRawdqOI%2FDg7nN5BOQQyXxB24%3D)